FMA PEQ-15A DBAL-A2 IR Invisible Laser LED White Light Visible Laser
Material： Nylon material
Gross weight： about 317g
Color: Black,Dark Earth
Battery Type:(1 cell) 3V CR123A lithium battery,Compatible with3.7V
Battery Life:>7 hrs.(Test environment 26 °C)Theoretical value
Waterproof level:IPX4
Visible laser:Output Power:High power: 5mw, low power: 1.2mw
Invisible laser:Output Power:High power: 1.7mw, low power: 0.5mw
LED white light:Output Power:Low brightness L: 36 lumens (lm), high brightnessH:70 lumens(lm)
Indicator light:Green light is normal, red light is low battery
ADAPTED TO PICATINNY RAIL: Easily attaches to any Picatinny rail via standard rail snap mounts.
LASER AIMING SYSTEM: This practical product for users is made of nylon material.And it has functions
such as LED white light, visible laser, IR invisible fill light, etc.
INSTALLATION METHOD:Quickly understand the product and lock the tightness adjustment method
REMOTE CONTROLINSTALLATION:Remote control can be installed for remote operation
MACHINE SIGHT BOARD
The standard machine sight plate provides users with the mostcomplete DBAL-A2
1.Press button
2.Press and turn counter clockwise
3.Loosen the screws appropriately
4.After installing the guide rail, turn it in the opposite direction
1. Using incorrect batteries may cause a fire or explosion hazard, As a note, makesure the battery does have similar physical characteristics to a CR123A battery, buthas a different voltage and/or polarity path. Make sure that only 3V lithium batterieswith raised positive (+) terminals or rechargeable batteries of the same type areinstalled in the DBAL-A2.
2.There is a risk of fire or explosion when using non-branded batteries. Makesure to install only 3V disposable batteries or 3V and 3.7V rechargeable batter.ies from reputable battery manufacturers in the DBAL-A2. These batteries arespecifically designed for use in high-performance, high-drainage equipmentand contain built-in faults. and thermal protection function.
3. lf you use rechargeable batteries, please make sure to use genuine 3V and3.7V batteries produced by well-known battery manufacturers. Do not useoff-brand or counterfeit batteries. Due to its unstable voltage, it may causeequipment damage or even risk of fire.
4. Don't stare into the laser beam.
5. Do not observe the laser beam through binoculars or telescopes.
6. Do not point the laser beam at the mirror-like surface.
FMA PEQ-15A DBAL-A2 IR Invisible Laser LED White Light Visible Laser
Material： Nylon material
Gross weight： about 317g
Color: Black,Dark Earth
Battery Type:(1 cell) 3V CR123A lithium battery,Compatible with3.7V
Battery Life:>7 hrs.(Test environment 26 °C)Theoretical value
Waterproof level:IPX4
Visible laser:Output Power:High power: 5mw, low power: 1.2mw
Invisible laser:Output Power:High power: 1.7mw, low power: 0.5mw
LED white light:Output Power:Low brightness L: 36 lumens (lm), high brightnessH:70 lumens(lm)
Indicator light:Green light is normal, red light is low battery
ADAPTED TO PICATINNY RAIL: Easily attaches to any Picatinny rail via standard rail snap mounts.
LASER AIMING SYSTEM: This practical product for users is made of nylon material.And it has functions
such as LED white light, visible laser, IR invisible fill light, etc.
INSTALLATION METHOD:Quickly understand the product and lock the tightness adjustment method
REMOTE CONTROLINSTALLATION:Remote control can be installed for remote operation
MACHINE SIGHT BOARD
The standard machine sight plate provides users with the mostcomplete DBAL-A2
1.Press button
2.Press and turn counter clockwise
3.Loosen the screws appropriately
4.After installing the guide rail, turn it in the opposite direction
1. Using incorrect batteries may cause a fire or explosion hazard, As a note, makesure the battery does have similar physical characteristics to a CR123A battery, buthas a different voltage and/or polarity path. Make sure that only 3V lithium batterieswith raised positive (+) terminals or rechargeable batteries of the same type areinstalled in the DBAL-A2.
2.There is a risk of fire or explosion when using non-branded batteries. Makesure to install only 3V disposable batteries or 3V and 3.7V rechargeable batter.ies from reputable battery manufacturers in the DBAL-A2. These batteries arespecifically designed for use in high-performance, high-drainage equipmentand contain built-in faults. and thermal protection function.
3. lf you use rechargeable batteries, please make sure to use genuine 3V and3.7V batteries produced by well-known battery manufacturers. Do not useoff-brand or counterfeit batteries. Due to its unstable voltage, it may causeequipment damage or even risk of fire.
4. Don't stare into the laser beam.
5. Do not observe the laser beam through binoculars or telescopes.
6. Do not point the laser beam at the mirror-like surface.
English
French
