$105.00
$90.00

WORLDWIDE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

WORLDWIDE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Sku: TB1452-ORANGE
FMA
Manufacturer: FMA
Material: Fireproof ABS+EPS foam inner pad
Weight: 740g
Color: Black/gray/red/yellow/blue/orange/white
Content: Helmet + wool Velcro sticker (set)+ reflective sticker (set)+ inner pad cotton
(one set of each thickness)
Size: Recommended head circumference within 61CM

FMA SAR series helmet shell by fireproof ABS material, fireproof abs, strong liquidity
resistance, high processing, high strength, quality assurance, good product quality,
good service, welcome to call consultation, quality assurance, high impact strength,
chemical resistance, flame retardant material environmental protection. The inner
"eps" is polystyrene foam. This substance is based on polystyrene resin as raw material,
in the process of making the foaming agent as an auxiliary reagent, and then heated
at high temperature to form the plastic foam, this foam is a more unique rigid closed
-cell structure. Its chemical structure is relatively stable and it is a durable property."
The inner layer is the same as the common skateboard helmet with a 2cm thickness
of EPS hard foam as a buffer layer, followed by sponge lining. Large protection area,
strong impact resistance. Two sets of sponge lining are provided, one thin and one
thick, in which the thick set is pre-installed on the helmet and the thin set is separately
installed. The liner is used for washing and replacement, and the polyester sponge is
suitable for replacement of different helmet groups.

Torsional lacing system has the following characteristics :1. No pressure point. Pressure
points are eliminated due to the unique lengthening of the drawstring guide and
precise closure. 2. Adjust the tightness at any time. The wearer can fine-tune the
tension immediately each time to the degree best suited to the BOA technology
available instead of traditional lacing. It is not possible to perform such adjustments
in use with normal tape. 3, reliable closure, will not loosen. If the strap stretches itself
throughout use, you can quickly turn the knob half way to tighten it again. No pressure
point, adjust the tightness at any time.
The holes in the guide rail are the same as in other Wendy helmets. You can choose
from original gray cover, MOE guide strip, quick-release headphone buckle, or Princeton
MPLS adapter.
The windscreen is locked with 5*12 hex socket screws and has a separate hole for
mounting the transparent goggle assembly.

EU2016/425 Standard

Helmet and Visor Only!
Manufacturer: FMA
Material: Fireproof ABS+EPS foam inner pad
Weight: 740g
Color: Black/gray/red/yellow/blue/orange/white
Content: Helmet + wool Velcro sticker (set)+ reflective sticker (set)+ inner pad cotton
(one set of each thickness)
Size: Recommended head circumference within 61CM

FMA SAR series helmet shell by fireproof ABS material, fireproof abs, strong liquidity
resistance, high processing, high strength, quality assurance, good product quality,
good service, welcome to call consultation, quality assurance, high impact strength,
chemical resistance, flame retardant material environmental protection. The inner
"eps" is polystyrene foam. This substance is based on polystyrene resin as raw material,
in the process of making the foaming agent as an auxiliary reagent, and then heated
at high temperature to form the plastic foam, this foam is a more unique rigid closed
-cell structure. Its chemical structure is relatively stable and it is a durable property."
The inner layer is the same as the common skateboard helmet with a 2cm thickness
of EPS hard foam as a buffer layer, followed by sponge lining. Large protection area,
strong impact resistance. Two sets of sponge lining are provided, one thin and one
thick, in which the thick set is pre-installed on the helmet and the thin set is separately
installed. The liner is used for washing and replacement, and the polyester sponge is
suitable for replacement of different helmet groups.

Torsional lacing system has the following characteristics :1. No pressure point. Pressure
points are eliminated due to the unique lengthening of the drawstring guide and
precise closure. 2. Adjust the tightness at any time. The wearer can fine-tune the
tension immediately each time to the degree best suited to the BOA technology
available instead of traditional lacing. It is not possible to perform such adjustments
in use with normal tape. 3, reliable closure, will not loosen. If the strap stretches itself
throughout use, you can quickly turn the knob half way to tighten it again. No pressure
point, adjust the tightness at any time.
The holes in the guide rail are the same as in other Wendy helmets. You can choose
from original gray cover, MOE guide strip, quick-release headphone buckle, or Princeton
MPLS adapter.
The windscreen is locked with 5*12 hex socket screws and has a separate hole for
mounting the transparent goggle assembly.

EU2016/425 Standard

Helmet and Visor Only!
  • Order will be shipped within 5 working days
  • During the check out process, You will see the required working days for mail items to reach recipients (subject to flight availability and customs clearance and aviation security check etc.). Mail items will be treated as priority mail in the destinations, speeding up mail processing.
  • The tracking no. will provide end-to-end online tracking of mail items starting from the completion of preparation  to last mile delivery at destination.
  • Sundays and public holidays are excluded for the purpose of determining the date of posting for all mail items and for performance measurement under the performance pledges.
  • Order will be shipped within 5 working days
  • During the check out process, You will see the required working days for mail items to reach recipients (subject to flight availability and customs clearance and aviation security check etc.). Mail items will be treated as priority mail in the destinations, speeding up mail processing.
  • The tracking no. will provide end-to-end online tracking of mail items starting from the completion of preparation  to last mile delivery at destination.
  • Sundays and public holidays are excluded for the purpose of determining the date of posting for all mail items and for performance measurement under the performance pledges.
  • Our Price Included applicable VAT / Custom Charge for ALL Destinations
  • If you're not satisfied for any reason, return the unused product within 14 days of delivery for a full refund minus shipping costs, no questions asked.
  • Products must be in the condition you received them- with all tags and packaging intact.
  • We have shipping center for return shipment in USA, UK and Australia.
  • Our Price Included applicable VAT / Custom Charge for ALL Destinations
  • If you're not satisfied for any reason, return the unused product within 14 days of delivery for a full refund minus shipping costs, no questions asked.
  • Products must be in the condition you received them- with all tags and packaging intact.
  • We have shipping center for return shipment in USA, UK and Australia.
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page